Master Bedroom Walk In Closet: Demo 8/3/13

I am really, really excited about how well things are going with this project. The details go through my head at every free minute. This project is on the verge of taking over my life!

I have scoured HOUZZ walk-in closet pages for hours. There are 425,000+ images of walk-in closets on HOUZZ.com.

Here’s what I’m thinking at this point in time, 7/29/13. Except on a MUCH smaller scale, I like the color and design of this closet above all others I’ve seen. You really have to see it microscopically for my project because this is a grand closet and ours will be barely adequate, sizewise. It’s the way the hanging spaces and shelves appear to be built, and the color that interest me. It’s just looks clean looking and doable, I think. After our stuff goes into the closet the clean-looking part will be a distant memory. Ha!

It took several weekends to get the old closet torn out without getting hurt (a big concern!). After confessing to John that I had been using a couple of pry bars and hammers for the demo, he advised me to get a “real” crowbar. So, I did and it made things much easier. Duh. TK helped me with the really scary stuff.

This tool, The Sonicrafter was extremely valuable in the demo. I bought the older model on Woot.com for $40. I don’t think the Sonicrafter is meant for this but it cut through 2x4s like a champ. It also cuts sheetrock beautifully, though dusty compared to a knife cut. Here are some demo pics.

This is after taking the doors off, obviously.  Sadly, the bookshelf had to go.

This is after taking the doors off, obviously. Sadly, the bookshelf had to go.

The semi-built-in bookshelf was one of my first projects, so it was kind of sad to see it go. We considered making the bookshelf into the closet door, and after tossing that idea, I tried to convince our neighbors to use it for something close to what they were looking to do in their living room. Maybe I’ll take it to my daughter’s new house and install it somewhere. It holds a lot of books. We used the opportunity to donate a lot of books from this shelf and one in the living room. Why is it so hard to part with books?

This is where I got to on day one.

This is where I got to on day one.

So, baseboard, door frame, carpet, bookshelf — gonzo. The flooring from the bedroom side was pulled back too.

In this picture you can see the wire for the closet light that needed to be moved and part of an upper wall that I originally wanted to keep to avoid additional framing and sheetrocking at the back dormer.

In this picture you can see the wire for the closet light that needed to be moved and part of an upper wall that I originally wanted to keep to avoid additional framing and sheetrocking at the back dormer.

I ran into a minor electrical issue when I took down the closet light and switch. After turning off the power to the room, I undid the wiring and took the light fixture down from inside the closet; no big deal, right? The demo was not at the point where I was ready to call my friend Joe the electrician, however, I managed to knock out the power to half the upstairs when I took apart the switch at the wall.

This is where I ended up after removing the light fixture. Don't worry the power is off.

This is where I ended up after removing the light fixture. Don’t worry the power is off.

Well, I was in quite a pickle so I, of course, called John, who was not available at the moment. I asked another friend and ended up with the situation in the picture above. John, our ex-nextdoorneighbor has good home wiring knowledge. He called me back and helped me through this one, as usual. Thank you John.

This is the rewire after removing the wiring from the light switch which cut off the power to the bedroom and bathroom. The electrician put in an outlet to remedy that and pulled out the light fixture wire.  Later he put in a new switch and left a wire hanging from the ceiling where the 2' florescent light will be.

This is the rewire after removing the wiring from the light switch which cut off the power to the bedroom and bathroom. The electrician put in an outlet to remedy that and pulled out the light fixture wire. Later he put in a new switch and left a wire hanging from the ceiling where the 2′ florescent light will be.

I’ve wired several light fixtures but that is it. Frankly, I would rather leave the electrical and plumbing stuff to the pros and not have to deal with it at all. Too much can go wrong with disastrous results. Luckily, Joe the electrician was able to come over the next day. He left me with a long curled-up wire that hung from the ceiling and a new outlet to conduct the electricity to the house.

As I mentioned in a photo (above), I was trying to save myself sheetrock mudding headaches by retaining the curved part of the ceiling that accommodates the back dormer. There was no hope of this. It took some time for my reasonable self to convince my idiot self to let go of the idea. It was not going to work in a number of ways, the last straw being Joe the electrician saying, “You can’t have a wall in front of a window”. It was going to be 24″ out and house a recessed cabinet, but it would have been an awkward space. Joe the electrician is a smart guy and knows much more about renovations than I do. He made several other suggestions; make the window smaller, shorten the heat register, use a florescent fixture instead of recessed lighting, because of code, and a couple of other things that I can’t remember now. I took all of his advice except making the window smaller. A friend who is experienced at this sort of thing came over and shortened the heat register and I reconfigured the space so it makes more sense.

I took this picture to show how the back dormer wall was framed.  The angle in the ceiling board (inside the ceiling) needs to be copied when I do the framing.  So, I had to take it down without damaging the angled ends too much.  These are the 2x4s that I cut away with the Sonicrafter.

I took this picture to show how the back dormer wall was framed. The angle in the ceiling board (inside the ceiling) needs to be copied when I do the framing. So, I had to take it down without damaging the angled ends too much. These are the 2x4s that I cut away with the Sonicrafter.

This is the last demo pic.

This is the last demo pic.

Framing is next!