TK and I have been working together the past few weekends trying to get the garage cleared out and organized enough to actually use for our cars this winter. We sold a couple of items on Craigslist, donated some things to Goodwill and are trying to organize the rest. The garage is 24′long x 22′wide. The goal is to accommodate 2 cars, a snowblower, a lawn mower, power tools, lumber, 3 bikes, firewood, two large town-owned trash/recycling bins, and gardening tool and supplies…AND two cars. It’s hard to believe but we are almost there!
The woodworking tools and supplies use up a lot of space, and that’s where we started. You may remember last winter’s basement-workshop project. This is where I got to with that: http://dianabuild.com/wp-content/uploads/2012/04/DSCN1257-1024×768.jpg You can see the post in its entirety under March 2012 archives, if you’re interested.
We started with a shelf that extends across most of this wall.
We attached the braces to the board with 3/4′ wood screws, marking the screw holes first. Then, using a level, simply attached the shelf with brackets to the wall. The shelf is high and I can barely reach it, but I’m short, so no big surprise there. We needed ample room under the shelf for the pegboard. The wood and braces for this shelf were two of only three things we had to buy for this project! The wood was around $23 at Home Depot and the braces were $5.99 each from Ace Hardware. Coupons made the expense of the latter easier to swallow.
The wall is sheetrocked due to fire code so we couldn’t just attach the pegboard to any exposed wall joists. You need a space behind the pegboard for the hooks. I was prepared to chop up leftover lengths of 8′ 2×3 boards to use for the hangers, when what to my wondering eyes should appear, but a box with leftover, already-chopped pieces of 2x3s, hoarded from another project! This saved us a lot of time and mess.
The 2×3 pieces are attached with 2 1/2″ screws to the wall joists. We would have done better to use 3″ screws but we didn’t have any. You could also frame the perimeter of the pegboard pieces with 2x3s, or even 1x3s, and attach it to the wall directly. I would do this if I were attaching an 8×12 sheet to a wall. With the smaller pieces of pegboard it would be overkill, in my opinion. Plus, the additional supports would plug up operative pegboard holes.
The lovely and talented, Hilary, a friend at work, donated the pegboard for our garage project-and brought it to me at work and helped me load it into my car. Thank you Hilary! I owe you a major haul of perennials These are used sheets of pegboard that Hilary’s parents rescued from a store that went out of business. It’s really good, heavy-duty stuff–and colorful, as you will see.
The last thing we bought was a variety pack of pegboard hooks from Ace Hardware for around $10.
We’re going to need a few more hooks. They make some really cool pegboard stuff. Check out the shelves on the pegboard made from brackets that came with the kit, also, the hanging bin (bought from Amazon), at the lower left–a great place for random nails, screws, and small pieces. I scraped the rest of the obnoxious label off today. This is the organizing bin: http://www.amazon.com/Crawford-PB2-Portable-Pegboard-Organizer/dp/B0009WG62U/ref=sr_1_9?ie=UTF8&qid=1353716298&sr=8-9&keywords=pegboard+accessories There is plenty of other pegboard exotica available, as I’m sure Amazon will remind you…